30t/h TGSS Scraper Conveyor Chain Conveyor For Grain Conveying
Tgss series scraper chain conveyor can be used for bulk grain storage and material distribution and unloading in large processing plants. It is also suitable for conveying powdery, fine and coarse materials. In addition to horizontal conveying, its design can also realize upward inclined conveying of materials.
● all operating parts of the equipment are equipped with safety covers to eliminate the hidden danger of injury to workers;
● a zero speed detector is installed on the driven shaft, which will stop the conveying immediately in case of chain failure - so as to achieve effective and timely safety measures.
● the firm design reduces the number of vulnerable parts and greatly reduces the maintenance cost;
● economical bending conveying chain, suitable for conveying with output below 200 tons and conveying distance within 80 meters;
● chain gears and links connected by bolts simplify and speed up the replacement process of components.
● in addition to the surface treatment of single or multi-layer powder coating, galvanizing treatment can also be provided. This diversity of tgss makes the scraper conveyor suitable for conveying a variety of different materials indoors and outdoors;
● use a variety of anti-wear metals or plastics to improve the flexibility of equipment application.
| Models Parameters | TGSS 16 | TGSS 20 | TGSS 25 | TGSS 32 | TGSS 40 | TGSS50 |
| Capacity(m³/h) | 15-20 | 20-40 | 40-70 | 70-140 | 140-210 | 210-280 |
| Chain Pitch(mm) | 66.675 | 66.675 | 66.675 | 66.675 | 125 | 125 |
| Transmission | Sleeve Roller Scraper Chain | Sleeve Roller Scraper Chain/Die Forging Chain |
| Power | Calculated By Length And Capacity |
Characteristic:
Side plate :-3/Q235 Bending forming
Top cover plate: -2/Q235
Bottom plate -5/16Mn wear-resistant material
Pin diameter: D = 12.7; chain plate thickness: δ = 6
Nylon scraper thickness: δ=14
Bearing: domestic LK
The whole machine is composed of transmission device, head, intermediate section, feeding (discharging) section, tail, scraper chain, etc
Real Application
The scraper chain conveyor can be used for horizontal transportation or inclined transportation. When the material is transported upward along the inclination, the inclination shall not exceed 25 °. When the material is transported downward, the inclination shall not exceed 20 °. When the inclination is large, anti-skid devices shall be installed. The flexible scraper conveyor is allowed to bend 2 ° ~ 4 ° in the horizontal and vertical directions
Maintenance, servicing .
1. The conveyor shall be observed frequently during operation. In case of any abnormal sound or fault in the conveyor, it shall be stopped in time for troubleshooting. It is not allowed to work with the fault.
2. Regularly check all parts of the equipment, especially the scraper chain and transmission device, to ensure that they are intact. Once any damaged parts are found, they should be repaired or replaced in time. The tightness of the scraper chain should be kept appropriate. If it is too tight, it will increase the negative force and intensify the wear. If it is too loose, it will easily jam the chain and cause accidents.
3. The cleaning brush shall be adjusted and replaced in time after being worn.
4. The motor, reducer and hydraulic coupling shall be maintained according to the requirements of their operating instructions.
5. Regularly remove and clean, replace worn parts, and lubricate all lubricating parts.
The project show :
Product Tags:
|
|
250mm 30t/H Heavy Duty Drag Inclined Chain Conveyor Belt Scraper Types Images
|
